Loading ... Welcome to iboot 1.00a043 built 04:36 2010-09-22 OC[7f] Reason: Help: tftp MAC IP IPsvr file mem nand usb ics v12 ICS reg val pci v17 reason x go mem auto iboot> iiiiiii ? iboot> ? ? iboot> hwelp ? iboot> help ? iboot> ayto ? iboot> auto ECC ON Ldk Ldi zlist 0 802f115c zone 802f0f14, name Normal zlist 1 802f1170 zone 802f0ccc, name DMA zlist 2 802f1184 zone 802f0f14, name Normal Built 1 zonelists Kernel command line: root=/dev/ram0 init=/linuxrc rw raid=noautodetect profile=2 kernel profiling enabled (shift: 2) PID hash table entries: 2048 (order: 11, 8192 bytes) Dentry cache hash table entries: 32768 (order: 3, 131072 bytes) Inode-cache hash table entries: 16384 (order: 2, 65536 bytes) Memory: 226176k/262144k available (2592k kernel code, 35888k reserved, 656k data, 96k init, 0k highmem) init_mm.pgd 8f0ff000 Mount-cache hash table entries: 2048 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 16384k freed NET: Registered protocol family 16 usbcore: registered new driver usbfs usbcore: registered new driver hub NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: -1, 8192 bytes) TCP established hash table entries: 8192 (order: 1, 32768 bytes) TCP bind hash table entries: 4096 (order: 0, 16384 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered audit: initializing netlink socket (disabled) audit(1070280003.140:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 4096 (order 0, 16384 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) nbd: registered device at major 43 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 xor engine => SPARC. device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com Serial: Padre driver $Revision: 1.1.1.1 $ 2 ports ttyS0 at I/O 0x0 (irq = 7) is a padre uart ttyS1 at I/O 0x0 (irq = 8) is a padre uart oprofile: using timer interrupt. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 5 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller md: Skipping autodetection of RAID arrays. (raid=noautodetect) RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Freeing unused kernel meÿpadre_i2c: module license 'Infrant Technologies, Inc.' taints kernel. padre_i2c: no version for "udiv" found: kernel tainted. TWSI Initialize Padre NSPIO setup: 80353394... No argv, go to default. raid5: xor select to PADRE_RXA. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx padre chip scan,token=1 Scan the padre NSP IO hardware. Need memory for RTEngine 63680 PIO mode on chan 7 DMA mode on chan 0 DMA mode on chan 1 DMA mode on chan 2 DMA mode on chan 3 Padre IDE controller, sata start:1 No TLER on ST3500630NS € hdc: ST3500630NS (s/n:9QG5DC3T), ATA DISK drive (ATAEXT) No TLER on ST3500630NS € hde: ST3500630NS (s/n:9QG5DDEF), ATA DISK drive (ATAEXT) No TLER on ST3500630NS € hdg: ST3500630NS (s/n:9QG58TNG), ATA DISK drive (ATAEXT) No TLER on ST3500630NS € hdi: ST3500630NS (s/n:9QG5CQ37), ATA DISK drive (ATAEXT) ide1 at 0x200-0x207,0x208 on irq 32 ide2 at 0x280-0x287,0x288 on irq 33 ide3 at 0x300-0x307,0x308 on irq 34 ide4 at 0x380-0x387,0x388 on irq 35 Update NSPIO settings 80353394. hdc: max request size: 512KiB hdc: use capacity 976773168 sectors (500107 MB) Drive support hpa, still should not change max addr. hdc: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63 hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 hde: max request size: 512KiB hde: use capacity 976773168 sectors (500107 MB) Drive support hpa, still should not change max addr. hde: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63 hde: cache flushes supported hde: hde1 hde2 hde3 hdg: max request size: 512KiB hdg: use capacity 976773168 sectors (500107 MB) Drive support hpa, still should not change max addr. hdg: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63 hdg: cache flushes supported hdg: hdg1 hdg2 hdg3 hdi: max request size: 512KiB hdi: use capacity 976773168 sectors (500107 MB) Drive support hpa, still should not change max addr. hdi: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63 hdi: cache flushes supported hdi: hdi1 hdi2 hdi3 Link to padre IO. RAID disks check: ALL = 22/33/34/56/0/0/0/0, 4 IDE = 22/33/34/56/0/0/0/0, 4 MD = 22/33/34/56/0/0/0/0, 4 RAID rule check result: 0 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 Disk protected mark = 1 Find PHY: 0 Lookup PHY ID: 0x000f, 0x01 P0 GPIO initialization... BOARDID=1 Boot type/reason: normal/0/0 Adjusting fan pwm........................ Found LM75 at 0x48 NAND device: Manufacture ID: 0xad, Chip ID: 0x76 (Hynix NAND 64MiB 3,3V 8-bit) size of table 4096 table is there 0x8 bad block 191 replacing by 4095 bad block 961 replacing by 4094 bad block 2120 replacing by 4093 bad block 3009 replacing by 4092 total bad block 4 bad 191 = 4095 bad 961 = 4094 bad 2120 = 4093 bad 3009 = 4092 bad 4092 = -1 bad 4093 = -1 bad 4094 = -1 bad 4095 = -1 Total bad block number 4 retlen = 0x0200 VPD checksum = 0x6927 ECC is ON Creating 2 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00000000-0x00100000 : "P0 flash partition 1" 0x00100000-0x03ff0000 : "P0 flash partition 2" NEON flash: probing 8-bit flash bus NEON flash: Found no Atmel device at location zero This board is not supported. You can use parm_extport=X module parm. ID=6013 on i2c_addr=1f GPIO2X=3c lcd:driver loaded md: Autodetecting RAID arrays. Update time on 0 :1789042905, raid 1 Update time on 1 :1705274479, raid 5 Update time on 2 :1789042903, raid 5 Update time on 3 :1789042905, raid 1 Update time on 4 :1705274479, raid 5 Update time on 5 :1789042903, raid 5 Update time on 6 :1789042905, raid 1 Update time on 7 :1705274479, raid 5 Update time on 8 :1789042903, raid 5 Update time on 9 :1789042905, raid 1 Update time on 10 :1705274479, raid 5 Update time on 11 :1789042903, raid 5 After sort Update time on 0 :1789042903, raid 5 Update time on 1 :1789042903, raid 5 Update time on 2 :1789042903, raid 5 Update time on 3 :1789042903, raid 5 Update time on 4 :1705274479, raid 5 Update time on 5 :1705274479, raid 5 Update time on 6 :1705274479, raid 5 Update time on 7 :1705274479, raid 5 Update time on 8 :1789042905, raid 1 Update time on 9 :1789042905, raid 1 Update time on 10 :1789042905, raid 1 Update time on 11 :1789042905, raid 1 md: autorun ... md: considering hdc1 ... md: adding hdc1 ... md: adding hdg1 ... md: adding hdi1 ... md: adding hde1 ... md: hdi2 has different UUID to hdc1 md: hdg2 has different UUID to hdc1 md: hde2 has different UUID to hdc1 md: hdc2 has different UUID to hdc1 md: hdi3 has different UUID to hdc1 md: hde3 has different UUID to hdc1 md: hdg3 has different UUID to hdc1 md: hdc3 has different UUID to hdc1 md: created md0 md: bind md: bind md: bind md: bind md: running: raid1: raid set md0 active with 4 out of 4 mirrors md: considering hdi2 ... md: adding hdi2 ... md: adding hdg2 ... md: adding hde2 ... md: adding hdc2 ... md: hdi3 has different UUID to hdi2 md: hde3 has different UUID to hdi2 md: hdg3 has different UUID to hdi2 md: hdc3 has different UUID to hdi2 md: created md1 md: bind md: bind md: bind md: bind md: running: raid5: device hdi2 operational as raid disk 3 raid5: device hdg2 operational as raid disk 2 raid5: device hde2 operational as raid disk 1 raid5: device hdc2 operational as raid disk 0 raid5: allocated 16500kB for md1 raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 0 RAID5 conf printout: --- rd:4 wd:4 fd:0 disk 0, o:1, dev:hdc2 disk 1, o:1, dev:hde2 disk 2, o:1, dev:hdg2 disk 3, o:1, dev:hdi2 Re-start RTE. drive=hdc,bdev=hdc2,d_start=0,p_start=4096032 drive=hde,bdev=hde2,d_start=0,p_start=4096032 drive=hdg,bdev=hdg2,d_start=0,p_start=4096032 drive=hdi,bdev=hdi2,d_start=0,p_start=4096032 RTEngine:map=0xf,state=0x1,base=0x0/0,off=0x3e8020/4096032, 8041db38,8041e240,8041e948,8041f050,81f58340,total=63680, a_use=0 md: considering hdi3 ... md: adding hdi3 ... md: adding hde3 ... md: adding hdg3 ... md: adding hdc3 ... md: created md2 md: bind md: bind md: bind md: bind md: running: raid5: device hdi3 operational as raid disk 3 raid5: device hde3 operational as raid disk 1 raid5: device hdg3 operational as raid disk 2 raid5: device hdc3 operational as raid disk 0 raid5: allocated 16500kB for md2 raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 0 RAID5 conf printout: --- rd:4 wd:4 fd:0 disk 0, o:1, dev:hdc3 disk 1, o:1, dev:hde3 disk 2, o:1, dev:hdg3 disk 3, o:1, dev:hdi3 Re-start RTE. Too many devices, stop RTEngine. md: ... autorun DONE. Checking for root...found Checking for valid root filesystem...kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. found linked, 1000mbps mode Checking root file system...done Mounting root filesystem...kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with journal data mode. done RTE off, go generic path RTE is in sleep state Adding 255968k swap on /dev/md1. Priority:0 extents:1 across:255968k Switching to MD root... INITšW–×WëË Ir¢½½Ñ¥¹¨Hø INITªÊ‹•É¥¹ÉÕ¹±•Ù•±éACCáRunning ReadyNAS Universal Startup Script... enable_irq(11) unbalanced from f804059c Setting disk write cache policy: hdchdc: cache flushes supported hdehde: cache flushes supported hdghdg: cache flushes supported hdihdi: cache flushes supported . Starting SSH: sshd. Starting LVM...done. Checking filesystems...done Setting kernel variables. Mounting filesystems: kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. /c Initializing urandom... done. Starting frontview boot scripts: frontview_rc. Starting portmap...done. Starting log daemons: syslogd klogd. Starting atd...done Starting inetd...done Starting cupsd...done Starting cron...done Starting Samba...done Starting quota service: rpc.rquotad. Exporting NFS shares...done. Starting NFS: statd nfsd mountd. udhcpc (v1.14.3) started Sending discover... Sending select for 192.168.1.170... Lease of 192.168.1.170 obtained, lease time 86400 apache-ssl: Could not reliably determine the server's fully qualified domain name, using 192.168.1.170 for ServerName Stopping rsync daemon: rsync. exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "*:/backup". Assuming default behaviour ('no_subtree_check'). NOTE: this default has changed since nfs-utils version 1.0.x exportfs: /etc/exports [2]: Neither 'subtree_check' or 'no_subtree_check' specified for export "*:/media". Assuming default behaviour ('no_subtree_check'). NOTE: this default has changed since nfs-utils version 1.0.x Starting rsync daemon: rsync. Starting monitor_enclosure..INFO: system monitor started. OK Starting hotplug: usb. RAIDiator 4.1.16 [192.168.1.170] nas01 login: